The New Choice in Manoeuvring
Advantages |
|||
|
|||
A complete Jet Thruster system includes: • Pump unit & pump outlet • Valve(s) • Installation kit • Nozzles available for all types of hull plating. | |||
Jet Thruster Single |
|||
Installation kit contains:
|
Jet Thruster Combi
![]() |
Installation kit contains:Water intake combination (2x JT-90S)
Pressure hose combination ( 2" BSP JT-30/JT- 50, 2.5" BSP JT-90)
|
JT-50 110 thrust LBS 24V |
JT-50 110 thrust LBS 12V |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
JT-70 154 thrust LBS 24V |
JT-90 198 thrust LBS 24V |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Jet Thruster Single
![]() |
Jet Thruster Combi
![]() |
Pump unit JT-30 / JT-50 JTS-30-00 / JTS-50-00
|
10 reasons to choose for a Jet Thruster
![]() |
1 |
Silent operationIn contradiction to a conventional tunnel thruster the Jet Thruster operation is quite. The are no sounds from a cavitating propeller producing the annoying loud sound that are common with conventional tunnel thrusters. |
![]() |
2 |
No tunnelThe nozzles or outlet are flanged thru hulls with a very small diameter. There is no need to drill large holes for installation of a tunnel with no Fiberglassing. The Jet Thruster can be installed in vessels that cannot fit a conventional bow, stern or retractable thruster with ease. |
![]() |
3 |
One system for maximum controlBesides the Jet Thruster Single for bow and stern thrusting a dual(combi) system is available. The combi for bow and stern enables you maximum control for your boat. With the combi you will have full directional control for perfect docking in all weather conditions |
![]() |
4 |
Stern-JetInstall a stern Thruster in conjunction with your existing bow thruster for addional docking control. |
![]() |
5 |
DraftIf you have a shallow draft boat or little room to install then the Jet Thruster is your solution. The nozzles can be places only a few inches below the waterline. |
![]() |
6 |
Flexible installationThe components of the system allow for many installation options making this system adaptable to fit in most any boat of any size. |
![]() |
7 |
Quality, simplicity and reliabilityWith no vulnerable electronic parts and standard electrical installation techniques it can be serviced all over the world without any special tools or equipment. Components that contact (sea) water are made of a corrosion resistant material. |
![]() |
8 |
ApplicabilityThe Jet Thruster can be applied in many Motorboats, Sailboats, Barges, Workboats, Catermarans constisting of polyesther, wood, steel and aluminium construction. |
![]() |
9 |
Reduce drag Saving fuel while increasing speedLarge tunnels cause resistance costing fuel and decreased speed. The Jet Thruster however works with very small outlet openings in bow and stern. Great for the sailboater looking for every knot out of there boat. |
![]() |
10 |
InstallationThe installation is easy and does not require special or special tools. Due to the ease of installion it can be installed in a fraction of the time of a conventional thruster. Reducing installation cost for the OEM, Marina or even the do-it-yourselfers |
Maximum control!
Wireless docking for your Vessel
![]() |
||||
Holland Marine Parts Jet Thrusters can be controlled with the dedicated Wireless Control Unit. Enabling you docking and manoeuvring your vessel with maximum control! • Water resistant (IP65) • Industrial quality • Comfortable grip Complete kit contains: Transmitter, Receiver, Antenna + cable |
||||
|